How To Use A Seat Belt The Correct Way To Use A Seat Belt

It also ensures that the legs are adequately cushioned in the event of a collision to avoid injury to the cross-section and upper body. Finally, the retractor urgently locks the webbing to secure the occupant and prevent the body from leaning forward to avoid collisions with the steering wheel, instrument panel and glazing. When suddenly stopped, the human body will still move at its original speed. In the event of a collision with the car, it can better protect the passengers in the rear seats. At the same time, because when children ride in the car, the safety factor is higher when sitting in the back seat and encountering special circumstances, if there is a rear child seat belt, it can play a good protective role.
First, the first step in properly fastening your seat belt - adjust your sitting posture.
1. The distance between the person and the steering wheel: The hands are stretched horizontally, and the wrists of both hands are just placed on the steering wheel, which is the most suitable distance.
2. Leg curvature: the leg is bent about 90 degrees, which is more convenient and flexible for the leg to react during emergency braking. It also ensures that the legs are adequately cushioned in the event of a collision to avoid injury to the cross-section and upper body.
3. Position of hands on the steering wheel: Placing your hands roughly horizontally at 9 and 3 o'clock helps to effectively control the vehicle in an emergency.
Second, the second step of properly fastening the seat belt - adjust the seat belt.
1. Hold the snap lock and deadbolt.
2. Slowly pull out the waist strap.
3. Make sure that the shoulder belt passes through the shoulder, close to the neck, and fits comfortably and closely to the body.